Site map+98 21 2201 8011Contact us
Research

Publications and research

Papers and research by the company's staff in scientific journals and conferences, with the reference, a short summary and a link to the full text at the publisher.

This list shows the scientific work of the company's staff, whether it was done at the company or earlier at a university. Each item says where the work was done, as printed in the paper. The full texts are with the publishers and open from each paper's link.

25papers and research16journals and conferencespublished2012–2024

25 items

International journals

  1. Energy and electrochemistryInternational journal article2024

    Spherical CuFeS2@FeSe2 structure as a binder-free electrode and its performance in asymmetric supercapacitors

    Tahereh Nikkhah Amirabad*, Ali A. Ensafi*

    Reaction Chemistry & Engineering, 9(12), 3267-3276 · Royal Society of Chemistry

    ICD staff
    Dr Tahereh Nikkhah Amirabad, Head of the Research Department
    Where the work was done
    Department of Chemistry, Isfahan University of Technology

    Hollow spherical CuFeS2 particles were grown without a binder by a hydrothermal route, and adding selenium wrapped them in FeSe2 nanosheets. This core-shell structure improves charge transfer and the use of the active material. An asymmetric supercapacitor made with it reached an energy density of 152 Wh/kg and kept 91% of its capacity after 3,000 cycles.

    International journal articleDOI 10.1039/d4re00144c
  2. Catalysis and reactionsInternational journal article2024

    Defect engineering of UiO-66 metal–organic framework: The role of temperature in the catalytic performance for methanol conversion

    Mahdi Sharifi, Rouein Halladj*, Sima Askari

    Inorganic Chemistry Communications, 167, 112781 · Elsevier

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Department of Chemical Engineering, Amirkabir University of Technology (Tehran Polytechnic)

    UiO-66 catalysts were made solvothermally at a range of temperatures up to 220 °C, and the effect of the synthesis and reaction temperatures on methanol conversion to dimethyl ether (DME) was studied. Raising the synthesis temperature improved the physicochemical properties and the catalytic performance; the sample made at 220 °C had the best properties and the highest activity in high-temperature methanol conversion.

    International journal articleDOI 10.1016/j.inoche.2024.112781
  3. Energy and electrochemistryInternational journal article2024

    Synthesis and characterization of MoS2-COOH /Co composite as electrode material for Asymmetric supercapacitors (SCs) and devices

    Kazem Karami, Fatemeh Noori, Tahereh Nikkhah Amirabad, Ali A. Ensafi

    Materials Science in Semiconductor Processing, 184, 108841 · Elsevier

    ICD staff
    Dr Tahereh Nikkhah Amirabad, Head of the Research Department
    Where the work was done
    Isfahan University of Technology

    A molybdenum disulfide composite functionalised with carboxyl groups and cobalt (MoS2-COOH/Co) was synthesised, characterised and tested as an electrode material for asymmetric supercapacitors.

    International journal articleDOI 10.1016/j.mssp.2024.108841
  4. Catalysis and reactionsInternational journal article2024

    Production of eco friendly DME fuel over sonochemically synthesized UiO66 catalyst

    Mahdi Sharifi, Rouein Halladj*, Sima Askari

    Scientific Reports, 14(1), 1755 · Springer Nature

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Department of Chemical Engineering, Amirkabir University of Technology (Tehran Polytechnic)

    UiO-66 was prepared with ultrasound at 80–220 °C and characterised by XRD, SEM, FTIR, N2 adsorption–desorption, TG-DTG and NH3-TPD; a higher synthesis temperature raised the crystallinity, surface area, thermal stability and acidity of the catalyst. In methanol conversion to dimethyl ether at 350–450 °C and 1 atm, the sample made at 220 °C performed best, with about 38 % conversion and about 51 % yield, and its activity held for about 5 h at 450 °C.

    International journal articleDOI 10.1038/s41598-024-52155-8
  5. Catalysis and reactionsInternational journal article2023

    Binder-free engineering design of Ni-MOF ultrathin sheet-like grown on PANI@GO decorated nickel foam as an electrode for in hydrogen evolution reaction and asymmetric supercapacitor

    Tahereh Nikkhah Amirabad, Ali A. Ensafi*, Kimia Zarean Mousaabadi, B. Rezaei, Muslum Demir

    International Journal of Hydrogen Energy, 48(76), 29471-29484 · Elsevier

    ICD staff
    Dr Tahereh Nikkhah Amirabad, Head of the Research Department
    Where the work was done
    Department of Chemistry, Isfahan University of Technology

    A nickel metal-organic framework (Ni-MOF) on polyaniline and graphene oxide was grown without a binder on nickel foam, by polymerisation and a hydrothermal step. In an asymmetric supercapacitor the electrode showed a high capacity and kept 92% of its performance after 5,000 cycles. The same material was tested as an electrocatalyst for the hydrogen evolution reaction (HER) in alkaline solution, with the lowest overpotential and Tafel slope among the samples compared.

    International journal articleDOI 10.1016/j.ijhydene.2023.04.159
  6. Energy and electrochemistryInternational journal article2022

    Boosting supercapacitor performance by in-situ modification of binder-free electrodes with green synthesized Zn-doped Fe2O3 nanoparticles on 2D-MoS2@rGO nanosheets

    Tahereh Nikkhah Amirabad, Ali A. Ensafi*, B. Rezaei

    Fuel, 330, 125645 · Elsevier

    ICD staff
    Dr Tahereh Nikkhah Amirabad, Head of the Research Department
    Where the work was done
    Department of Chemistry, Isfahan University of Technology

    Zinc-doped iron oxide nanoparticles, made by green synthesis, were attached without a binder to ultrathin MoS2 and reduced graphene oxide nanosheets and used as the active material of a supercapacitor electrode. The material was characterised by TEM, FE-SEM, EDX, XRD, XPS and FT-IR. The electrode reached a specific capacitance of 3078 F/g at 1 A/g, and an asymmetric supercapacitor made with it delivered an energy density of 38.9 Wh/kg.

    International journal articleDOI 10.1016/j.fuel.2022.125645
  7. Catalysis and reactionsInternational journal article2015

    Dry reforming of methane over nanostructured Co/Y catalyst for hydrogen production: Effect of ultrasound irradiation and Co-loading on catalyst properties and performance

    Mozaffar Abdollahifar, Mohammad Haghighi*, Mahdi Sharifi

    Energy Conversion and Management, 103, 1101-1112 · Elsevier

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Chemical Engineering Faculty and Reactor and Catalysis Research Center, Sahand University of Technology

    Co/Y nanocatalysts with different cobalt loadings on zeolite Y were made by a sonochemical (ultrasound) route and by impregnation and compared by XRD, FESEM, EDX, TEM, BET and FTIR. The sonochemical route gave better-dispersed particles and a larger surface area; in the 5 wt% cobalt sample nearly all cobalt particles were under 40 nm. Ultrasound doubled this sample's initial activity in dry reforming of methane, and the 10 wt% cobalt sample was the most active, though it was not stable after 600 min at 850 °C.

    International journal articleDOI 10.1016/j.enconman.2015.04.053
  8. Catalysis and reactionsInternational journal article2015

    Sono-dispersion of bimetallic Ni–Co over zeolite Y used in conversion of greenhouse gases CH4/CO2 to high valued syngas

    Mahdi Sharifi, Mohammad Haghighi*, Mozaffar Abdollahifar

    Journal of Natural Gas Science and Engineering, 23, 547-558 · Elsevier

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Chemical Engineering Faculty and Reactor and Catalysis Research Center, Sahand University of Technology

    Bimetallic Ni–Co catalysts with two nickel-to-cobalt proportions (Ni7Co3/Y and Ni3Co7/Y) were deposited on zeolite Y with ultrasound to find the best active-phase composition for biogas reforming, and characterised by XRD, FESEM, EDX, BET and FTIR. Ni7Co3/Y had smaller particles with a narrower size distribution, was more active than zeolite Y and Ni3Co7/Y at all temperatures, and stayed stable for 10 h.

    International journal articleDOI 10.1016/j.jngse.2015.03.006
  9. Catalysis and reactionsInternational journal article2014

    Syngas production via dry reforming of CH4 over Co- and Cu-promoted Ni/Al2O3–ZrO2 nanocatalysts synthesized via sequential impregnation and sol–gel methods

    Mahdi Sharifi, Mohammad Haghighi*, Farhad Rahmani, Samira Karimipour

    Journal of Natural Gas Science and Engineering, 21, 993-1004 · Elsevier

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Chemical Engineering Faculty and Reactor and Catalysis Research Center, Sahand University of Technology

    Ni/Al2O3–ZrO2 nanocatalyst was made by sequential impregnation and by sol–gel, with cobalt or copper added, and tested in dry reforming of methane. The sol–gel route dispersed nickel and zirconium better and raised the surface area; in the sol–gel Ni–Co sample about 95 % of the particles were 10–40 nm, averaging 27.4 nm. Adding Co and Cu improved feed conversion and the syngas ratio, cobalt more so; the sol–gel Ni–Co/Al2O3–ZrO2 sample was the most active over a 1440 min run at 850 °C.

    International journal articleDOI 10.1016/j.jngse.2014.10.030
  10. Catalysis and reactionsInternational journal article2014

    Hydrogen production via reforming of biogas over nanostructured Ni/Y catalyst: Effect of ultrasound irradiation and Ni-content on catalyst properties and performance

    Mahdi Sharifi, Mohammad Haghighi*, Mozaffar Abdollahifar

    Materials Research Bulletin, 60, 328-340 · Elsevier

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Chemical Engineering Faculty and Reactor and Catalysis Research Center, Sahand University of Technology

    Ni/Y catalysts with different nickel loadings on zeolite Y were made by sonochemical and impregnation routes and characterised by XRD, FESEM, EDX, BET, FTIR and TEM; ultrasound gave higher nickel dispersion, a larger surface area and smaller particles. In biogas reforming at CH4/CO2 = 1 and 550–850 °C, the ultrasound-made 5 wt% Ni sample performed best and stayed stable for 600 min, and the sonochemical route brought the H2/CO ratio very close to equilibrium.

    International journal articleDOI 10.1016/j.materresbull.2014.07.027

Iranian scientific journals

  1. Catalysis and reactionsIranian scientific journal article2017

    A Comparative Synthesis and Physicochemical Characterizations of Ni/Al2O3 Nanocatalyst via Sequential Impregnation and Sol-Gel Methods Used for Dry Reforming of Methane

    Mahdi Sharifi, Mohammad Haghighi*, Nader Rahemi, Farhad Rahmani

    Journal of Petroleum Research, 27(96-2), 146-159 · Research Institute of Petroleum Industry (RIPI)

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Chemical Engineering Faculty and Reactor and Catalysis Research Center, Sahand University of Technology

    Ni/Al2O3 nanocatalyst was made by sequential impregnation and by sol-gel to see how the synthesis route affects its physicochemical properties, activity and stability in dry reforming of methane, with biogas as the intended feed. The sol-gel route gave an amorphous phase, uniformly distributed particles below 60 nm and a larger surface area. In tests at 550–850 °C and a 24 h stability run at 850 °C, the sol-gel catalyst performed better, gave syngas with a ratio of 0.99 and lost less activity.

    Iranian scientific journal articleDOI 10.22078/pr.2017.752
  2. Catalysis and reactionsIranian scientific journal article2016

    Synthesis and Characterization of Ni-Cu/Al2O3-ZrO2 Nanocatalyst via Sequential Impregnation and Sol-Gel Methods Used in CH4/CO2 Conversion to Syngas

    Mahdi Sharifi, Mohammad Haghighi*, Ali Alizadeh Eslami, Farhad Rahmani, Nader Rahemi

    Journal of Petroleum Research, 25(85-1), 142-157 · Research Institute of Petroleum Industry (RIPI)

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Chemical Engineering Faculty, Sahand University of Technology

    Ni-Cu/Al2O3-ZrO2 nanocatalyst was made by sequential impregnation and by sol-gel and examined by XRD, FESEM, PSD, EDS, FTIR and TG-DTG. The sol-gel route gave more uniform particles and nearly amorphous phases but, with the particles packed more densely, a smaller surface area. In dry reforming of methane at atmospheric pressure and 550–850 °C the sol-gel catalyst was more active, and the best result came at 850 °C with a syngas ratio of 0.94, close to stoichiometric.

    Iranian scientific journal articleDOI 10.22078/pr.2016.586
  3. Catalysis and reactionsIranian scientific journal article2014

    Reforming of Biogas over Co- and Cu-Promoted Ni/Al2O3-ZrO2 Nanocatalysts Synthesized via Sequential Impregnation Method

    Mahdi Sharifi, Mohammad Haghighi, Farhad Rahmani, Nader Rahemi

    Journal of Renewable Energy and Environment, 1(1), 53-63 · Materials and Energy Research Center (MERC)

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Department of Chemical Engineering and Reactor and Catalysis Research Center, Sahand University of Technology

    The effect of adding copper and cobalt to a Ni/Al2O3-ZrO2 catalyst made by sequential impregnation was studied in biogas reforming, with characterisation by XRD, FESEM, BET and FTIR. The promoters improved particle dispersion and size uniformity without a marked change in surface area. At atmospheric pressure, CO2/CH4 = 1 and 550–850 °C, Ni-Co/Al2O3-ZrO2 was the most active, and all catalysts stayed stable for 24 h at 850 °C.

    Iranian scientific journal articleDOI 10.30501/jree.2014.70056

Conferences in Iran and abroad

  1. Catalysis and reactionsConference paper2013

    مقایسه روش تلقیح و التراسوند در سنتز و ارزیابی کاتالیست نانوساختار Ni(10%)/Y جهت استفاده در تولید گاز سنتز از گازهای گلخانه‌ای CH4 و CO2

    Comparison of impregnation and ultrasound methods in the synthesis and evaluation of a nanostructured Ni(10%)/Y catalyst for syngas production from the greenhouse gases CH4 and CO2

    مهدی شریفی، محمد حقیقی، مظفر عبدالهی فر

    2nd National Conference on New and Clean Energies · Ham-Andishan Mohit Zist Farda Co.

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    A Ni(10%)/Y catalyst was prepared by impregnation and by ultrasound and characterised by BET, FESEM, XRD and FTIR; ultrasound had little effect on crystal growth and surface area but gave smaller particles. In dry reforming of methane (1 atm, CH4/CO2 = 1, 40 cm³/min, 550–850 °C) the ultrasound sample converted 10–15% more feed at every temperature, and its activity held steady for 600 minutes at 850 °C.

    Paper page
    Conference paper
  2. Catalysis and reactionsConference paper2013

    تولید گاز سنتز روی کاتالیست نانوساختار Ni-Co/Y سنتزی به روش التراسوند

    Syngas production over an ultrasound-synthesised nanostructured Ni-Co/Y catalyst

    مهدی شریفی، محمد حقیقی، مظفر عبدالهی فر

    2nd National Conference on New and Clean Energies · Ham-Andishan Mohit Zist Farda Co.

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    Bimetallic Ni-Co catalysts with different nickel-to-cobalt ratios on zeolite Y were prepared by ultrasound and characterised by BET, FESEM, XRD and FTIR. Ni(7%)-Co(3%)/Y had smaller particles and more accessible active metal, though a lower surface area because of pore blocking, and showed the highest initial activity in dry reforming of methane at 550–850 °C. Feed conversion held for 600 minutes at 850 °C, but the syngas ratio fell because of CO formed by the reverse Boudouard reaction.

    Paper page
    Conference paper
  3. Catalysis and reactionsConference paper2013

    سنتز و تعیین خصوصیات کاتالیست نانوساختار Co/Y با مقادیر متغیر کبالت به روش تلقیح جهت استفاده در ریفورمینگ بیوگاز

    Synthesis and characterisation of nanostructured Co/Y catalysts with varying cobalt content by impregnation for biogas reforming

    مظفر عبداللهی فر، محمد حقیقی، مهدی شریفی

    2nd National Conference on New and Clean Energies · Ham-Andishan Mohit Zist Farda Co.

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    Co/Y catalysts with 5% and 10% cobalt were prepared by impregnation for biogas reforming and characterised by BET, FESEM, XRD and FTIR; the 10% sample had smaller, more uniform particles, a larger surface area and a more accessible active phase. In activity tests (1 atm, CH4/CO2 = 1, 550–850 °C) it converted 20–70% more feed than the other samples, but its activity fell by more than 20% after 600 minutes at 850 °C, attributed to coking and sintering of the active phase.

    Paper page
    Conference paper
  4. Catalysis and reactionsConference paper2013

    تاثیر التراسوند در سنتز کاتالیست نانوساختار Co(5%)/Y جهت استفاده در فرایند ریفورمینگ خشک متان برای تولید هیدروژن

    Effect of ultrasound in the synthesis of a nanostructured Co(5%)/Y catalyst for dry reforming of methane to produce hydrogen

    مهدی شریفی، محمد حقیقی، مظفر عبدالهی فر

    2nd National Conference on New and Clean Energies · Ham-Andishan Mohit Zist Farda Co.

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    A Co(5%)/Y catalyst for dry reforming of methane was prepared by ultrasound and by impregnation and the two were compared by BET, FESEM, XRD and FTIR; ultrasound reduced the crystal growth of zeolite Y and increased the surface area, surface porosity and accessibility of the active phase. In activity tests (1 atm, CH4/CO2 = 1, 550–850 °C) the ultrasound sample had the better initial activity, but because of the low active-phase loading, feed conversion and product yields stayed below 50%.

    Paper page
    Conference paper
  5. Catalysis and reactionsConference paper2013

    تأثیر مقدار نیکل در کاتالیست نانوساختار Ni/Y سنتزی به روش اولتراسوند جهت استفاده در تبدیل CH4 و CO2 به گاز سنتز

    Effect of nickel content in an ultrasound-synthesised nanostructured Ni/Y catalyst for the conversion of CH4 and CO2 to syngas

    مهدی شریفی، محمد حقیقی، مظفر عبدالهی فر

    3rd National Conference on Fuel, Energy and Environment · Materials and Energy Research Center (MERC)

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    Two Ni/Y catalysts with 2% and 5% nickel on zeolite Y were prepared with ultrasound, characterised by XRD, FESEM and BET, and tested in dry reforming of methane at 1 atm, a feed ratio of 1 and 550–850 °C. The 5% sample had smaller particles and, despite a lower specific surface area attributed to partial pore blocking, was more active, with its activity unchanged over 600 minutes.

    Paper page
    Conference paper
  6. Catalysis and reactionsConference paper2013

    مقایسه عملکرد کاتالیست‌های نانوساختار Co و Ni-Co بر پایه زئولیتی جهت استفاده در فرآیند ریفورمینگ بیوگاز

    Comparison of the performance of zeolite-supported nanostructured Co and Ni-Co catalysts in biogas reforming

    مهدی شریفی، محمد حقیقی، مظفر عبدالهی فر

    3rd National Conference on Fuel, Energy and Environment · Materials and Energy Research Center (MERC)

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    Co(5%)/Y and Ni(5%)-Co(5%)/Y catalysts on zeolite Y were prepared with ultrasound, characterised by XRD, FESEM and BET, and tested in biogas reforming to syngas at 1 atm and a feed ratio of 1. Although the second metal cancelled the effect of ultrasound on particle size and surface area, the bimetallic catalyst performed best thanks to its higher active-metal content and stayed stable for 600 minutes at 850 °C; cobalt alone could not adsorb and decompose methane.

    Paper page
    Conference paper
  7. Catalysis and reactionsConference paper2013

    مقایسه روش‌های تلقیح و اولتراسوند در سنتز کاتالیست نانوساختار Ni(5%)/Y برای تولید هیدروژن از گازهای گلخانه‌ای CH4 و CO2

    Comparison of impregnation and ultrasound methods in the synthesis of a nanostructured Ni(5%)/Y catalyst for hydrogen production from the greenhouse gases CH4 and CO2

    مهدی شریفی، محمد حقیقی، مظفر عبدالهی فر

    3rd National Conference on Fuel, Energy and Environment · Materials and Energy Research Center (MERC)

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    A Ni(5%)/Y catalyst was prepared once by impregnation and once with ultrasound, and the two samples were characterised by XRD, BET and FESEM and compared in dry reforming of methane (1 atm, feed ratio 1, 550–850 °C). The ultrasound sample had a larger surface area and smaller particles, gave higher feed conversion and product yields, and stayed stable for 600 minutes; the stability is attributed to strong CO2 adsorption promoting the reverse Boudouard reaction.

    Paper page
    Conference paper
  8. Catalysis and reactionsConference paper2013

    تأثیر مقدار کبالت در کاتالیست نانوساختار Co/Y سنتزی به روش اولتراسوند جهت استفاده در ریفورمینگ خشک متان

    Effect of cobalt content in an ultrasound-synthesised nanostructured Co/Y catalyst for dry reforming of methane

    مظفر عبدالهی فر، محمد حقیقی، مهدی شریفی

    3rd National Conference on Fuel, Energy and Environment · Materials and Energy Research Center (MERC)

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    Co/Y catalysts with 5% and 10% cobalt were prepared with ultrasound, characterised by XRD, FESEM and BET, and tested in dry reforming of methane to syngas at 1 atm and a feed ratio of 1. More cobalt raised the surface area and surface porosity, and ultrasound limited crystal growth. Co(10%)/Y performed best: with this cobalt content the catalyst's activity rose about fourfold.

    Paper page
    Conference paper
  9. Catalysis and reactionsConference paper2013

    سنتز نانوکاتالیست Ni/Al2O3 با استفاده از روش‌های تلقیح و سل-ژل جهت استفاده در تولید گاز سنتز از متان و دی‌اکسید کربن

    Synthesis of a Ni/Al2O3 nanocatalyst by impregnation and sol-gel methods for syngas production from methane and carbon dioxide

    مهدی شریفی، محمد حقیقی، فرهاد رحمانی، سوگند آقامحمدی

    1st National Conference on Industrial Catalysts · Shiraz University

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    A Ni/Al2O3 nanocatalyst for dry reforming of methane was prepared by sol-gel and by impregnation and compared by XRD, FESEM, PSD, FTIR and BET; sol-gel gave an amorphous, spinel-free structure, a larger surface area and uniform particles averaging 35.9 nm. At 1 atm, CO2/CH4 = 1 and 550–850 °C the sol-gel sample converted more feed at every temperature and gave syngas with a ratio of 0.99; in a 24-hour stability test at 850 °C it lost half as much activity as the impregnated sample.

    Paper page
    Conference paper
  10. Catalysis and reactionsConference paper2012

    مقایسه تقویت‌کننده کبالت و مس روی خصوصیات و عملکرد نانوکاتالیست Ni/Al2O3-ZrO2 سنتزی به روش سل-ژل جهت تولید گاز سنتز

    Comparison of cobalt and copper promoters on the properties and performance of a sol-gel-synthesised Ni/Al2O3-ZrO2 nanocatalyst for syngas production

    مهدی شریفی، محمد حقیقی، فرهاد رحمانی، سمیرا کریمی پور

    14th Iranian National Chemical Engineering Congress · Sharif University of Technology

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    The effect of adding cobalt or copper to a sol-gel Ni/Al2O3-ZrO2 nanocatalyst for dry reforming of methane was studied, with characterisation by XRD, FESEM, BET and FTIR. The cobalt-promoted sample had finer, more uniform particles and a larger surface area, and gave higher hydrogen and carbon monoxide yields and syngas with a ratio of 1, attributed to cobalt's higher activity in methane decomposition. Zirconia helped keep the nanocatalysts' activity stable by preventing spinel formation and increasing basicity.

    Paper page
    Conference paper
  11. Materials and nanostructuresConference paper2012

    مقایسه خواص فیزیکی-شیمیایی نشاندن نیکل، مس و زیرکونیا روی آلومینا با استفاده از روش‌های تلقیح و سل-ژل

    Comparison of the physicochemical properties of nickel, copper and zirconia deposited on alumina by impregnation and sol-gel methods

    مهدی شریفی، محمد حقیقی، علی علیزاده اسلامی، فرهاد رحمانی

    1st International Conference on Oil, Gas, Petrochemical and Power Plants

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology

    The effect of adding zirconia to the support and copper (3 wt%) to the active phase of a Ni/Al2O3 nanocatalyst made by sol-gel and by impregnation was studied with XRD, SEM, BET, FTIR and TG-DTG. Impregnation gave smaller particles and a larger surface area, sol-gel a more uniform distribution and higher dispersion; the lower sol-gel surface area was linked to fast hydrolysis caused by acetylacetone and to the copper. Zirconia kept nickel and copper out of the alumina lattice, preventing spinels, and copper improved the dispersion of the active phase.

    Paper page
    Conference paper
  12. Materials and nanostructuresConference paper2012

    سنتز و تعیین خصوصیات نانوکاتالیست Ni/Al2O3-ZrO2 تقویت‌شده با کبالت با استفاده از روش‌های تلقیح متوالی و سل-ژل

    Synthesis and characterisation of a cobalt-promoted Ni/Al2O3-ZrO2 nanocatalyst by sequential impregnation and sol-gel methods

    علی علیزاده اسلامی، محمد حقیقی، مهدی شریفی، فرهاد رحمانی

    1st International Conference on Oil, Gas, Petrochemical and Power Plants

    ICD staff
    Dr Mahdi Sharifi, Senior Research and Development Expert
    Where the work was done
    Reactor and Catalysis Research Center, Sahand University of Technology
    Paper page
    Conference paper

The summaries are written by ICD, not by the publishers. Each paper's full text is with its publisher.

Talk to our engineers about the right catalyst for your unit.