Site map+98 21 2201 8011Contact us
Industries

Petrochemical industry

Natural-gas reforming and the catalyst for each step in methanol, ammonia and urea plants.

Natural-gas reforming, the basis of methanol and ammonia

In methanol and ammonia plants, natural gas is desulfurized and then converted into synthesis gas in the reformers. In a methanol plant the synthesis gas becomes methanol in the synthesis reactor. In an ammonia plant, air added in the secondary reformer brings in the nitrogen, and the carbon oxides are removed in the shift and methanation reactors to make ammonia synthesis gas. The ammonia is the feed of the urea plant.

The catalyst for each step

Steam reformingICD-410
Autothermal reformingICD-420
Secondary reforming (ammonia)ICD-430
Feed hydrogenationICD-510
Pre-reformingICD-520
High- and low-temperature shiftICD-530 and ICD-540
MethanationICD-550
DesulfurizationICD-720

At the Kish industry and petrochemical exhibition in February 2024, managers of the Mahshahr, Shazand, Pardis and Kimiya petrochemical companies and of the Arak petrochemical research and technology company visited the company's stand.

Trial sample and technical proposal

To test a catalyst in your plant, ask for a trial sample or a technical proposal.

Ask for a sample

Unit map

Methanol units

Natural gas becomes syngas in the reformers, and syngas becomes methanol in the synthesis reactor.

  1. FeedNatural gas and steam
  2. Feed hydrogenation
  3. Desulfurization
  4. Pre-reforming
  5. Steam reforming
  6. Autothermal reformingIn combined or autothermal reforming schemes.
  7. Methanol synthesis
    • OutputMethanol
    The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

    Ammonia and urea units

    Natural gas, steam and air become ammonia syngas (hydrogen and nitrogen); ammonia is the feed of the urea plant.

    1. FeedNatural gas, steam and air
    2. Feed hydrogenation
    3. Desulfurization
    4. Primary reforming
    5. Secondary reformingWith process air added, the reforming of the remaining methane with steam is completed and the nitrogen needed for ammonia enters the gas.
    6. High-temperature shift
    7. Low-temperature shift
    8. MethanationRemoves the remaining carbon oxides before ammonia synthesis.
    9. OutputAmmonia syngas for the synthesis reactor
    The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

    Products for this industry

    ICD-410Primary Steam Reforming CatalystSteam methane reforming catalyst for producing syngas and hydrogen in the petrochemical and oil industries.
    ICD-420Autothermal Reforming CatalystAutothermal methane reforming catalyst for syngas production.
    ICD-430Secondary Steam Reforming CatalystSecondary reformer catalyst for ammonia plants; with steam and process air it completes the reforming of the remaining methane and brings the nitrogen needed for ammonia synthesis into the syngas.
    ICD-510Hydro-Desulfurization Catalyst (HDC)Hydrodesulfurization catalyst; converts organic sulfur in the feed to H₂S for the zinc-oxide bed.
    ICD-520Pre-Reforming CatalystPre-reforming catalyst; converts the heavier hydrocarbons of the feed before the main reformer.
    ICD-530High Temperature Shift Catalyst (HTSC)High-temperature shift catalyst; converts most of the carbon monoxide in syngas with steam into hydrogen.
    ICD-540Low Temperature Shift Catalyst (LTSC)Low-temperature shift catalyst; converts the carbon monoxide left after high-temperature shift.
    ICD-550Methanation CatalystMethanation catalyst; converts the remaining carbon oxides into methane.
    ICD-720Sulfur AdsorbentZinc-oxide adsorbent for removing sulfur from gas feeds in oil, gas and petrochemical units.
    Talk to our engineers about the right catalyst for your unit.