Site map+98 21 2201 8011Contact us
Petrochemical industry catalysts

ICD-720 Sulfur Adsorbent

Zinc-oxide adsorbent for removing sulfur from gas feeds in oil, gas and petrochemical units.

Sulfur Adsorbent

Where it is used

The process steps where this product is used are highlighted.

Hydrogen units

The hydrogen unit makes, from natural gas or naphtha and steam, the hydrogen that the refinery's treating and hydrocracking units need.

  1. FeedNatural gas or naphtha, and steam
  2. Feed hydrogenationConverts organic sulfur compounds to H₂S.
  3. DesulfurizationZinc oxide absorbs the H₂S.
  4. Steam reforming
  5. High-temperature shift
  6. Low-temperature shift
  7. MethanationIn units that convert the remaining carbon monoxide to methane instead of PSA purification.
  8. OutputHydrogen for treating and hydrocracking units
The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

Methanol units

Natural gas becomes syngas in the reformers, and syngas becomes methanol in the synthesis reactor.

  1. FeedNatural gas and steam
  2. Feed hydrogenation
  3. Desulfurization
  4. Pre-reforming
  5. Steam reforming
  6. Autothermal reformingIn combined or autothermal reforming schemes.
  7. Methanol synthesis
    • OutputMethanol
    The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

    Ammonia and urea units

    Natural gas, steam and air become ammonia syngas (hydrogen and nitrogen); ammonia is the feed of the urea plant.

    1. FeedNatural gas, steam and air
    2. Feed hydrogenation
    3. Desulfurization
    4. Primary reforming
    5. Secondary reformingWith process air added, the reforming of the remaining methane with steam is completed and the nitrogen needed for ammonia enters the gas.
    6. High-temperature shift
    7. Low-temperature shift
    8. MethanationRemoves the remaining carbon oxides before ammonia synthesis.
    9. OutputAmmonia syngas for the synthesis reactor
    The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

    The technical and safety data sheets of this product are sent on request. Request the technical or safety data sheet

    Talk to our engineers about the right catalyst for your unit.