Site map+98 21 2201 8011Contact us

Products

Catalysts and adsorbents

Unit map

At which step of the process is each catalyst used? Choose a plant unit, then click a catalyst to open its page.

Direct reduction of iron units

In the reformer of a direct-reduction plant, natural gas and recycled top gas from the furnace are turned into reducing gas, which reduces iron ore pellets to sponge iron.

  1. FeedNatural gas and recycled top gas from the reduction furnace
  2. Feed gas desulfurizationThe zinc-oxide (ZnO) adsorbent takes up the sulfur compounds in the feed gas before it enters the reformer, so that the reformer catalyst is not poisoned.
  3. ReformerThe reformer tubes are filled from bottom to top with layers of inert, semi-active and active catalyst; ICD-120 and ICD-130 are for PERED plants.
  4. OutputReducing gas (hydrogen and carbon monoxide) for the reduction furnace
The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

Sulfuric acid production units

In the catalytic converter, sulfur dioxide is oxidised to sulfur trioxide over a vanadium catalyst and becomes sulfuric acid in the absorption tower.

  1. FeedSulfur dioxide gas
  2. Converter: oxidation of SO₂ to SO₃The converter usually has four beds; the low-ignition cesium-promoted catalyst mostly goes in the top layer of the first bed or in the last bed. The technical department confirms the bed for each catalyst.
  3. OutputSulfur trioxide to the absorption tower and sulfuric acid
The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

Hydrogen units

The hydrogen unit makes, from natural gas or naphtha and steam, the hydrogen that the refinery's treating and hydrocracking units need.

  1. FeedNatural gas or naphtha, and steam
  2. Feed hydrogenationConverts organic sulfur compounds to H₂S.
  3. DesulfurizationZinc oxide absorbs the H₂S.
  4. Steam reforming
  5. High-temperature shift
  6. Low-temperature shift
  7. MethanationIn units that convert the remaining carbon monoxide to methane instead of PSA purification.
  8. OutputHydrogen for treating and hydrocracking units
The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

Methanol units

Natural gas becomes syngas in the reformers, and syngas becomes methanol in the synthesis reactor.

  1. FeedNatural gas and steam
  2. Feed hydrogenation
  3. Desulfurization
  4. Pre-reforming
  5. Steam reforming
  6. Autothermal reformingIn combined or autothermal reforming schemes.
  7. Methanol synthesis
    • OutputMethanol
    The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

    Ammonia and urea units

    Natural gas, steam and air become ammonia syngas (hydrogen and nitrogen); ammonia is the feed of the urea plant.

    1. FeedNatural gas, steam and air
    2. Feed hydrogenation
    3. Desulfurization
    4. Primary reforming
    5. Secondary reformingWith process air added, the reforming of the remaining methane with steam is completed and the nitrogen needed for ammonia enters the gas.
    6. High-temperature shift
    7. Low-temperature shift
    8. MethanationRemoves the remaining carbon oxides before ammonia synthesis.
    9. OutputAmmonia syngas for the synthesis reactor
    The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →
    CodeProductCategoryUnits
    ICD-100High Active Reforming CatalystActive catalyst for the top layer of the reformer tubes in direct-reduction plants.Steel industry catalystsDirect reduction of iron unitsRead more →
    ICD-110Domed High Active Reforming CatalystActive catalyst with domed pellets for the top layer of the reformer tubes in direct-reduction plants.Steel industry catalystsDirect reduction of iron unitsRead more →
    ICD-120High Active Reforming Catalyst (PERED)Active catalyst for the top layer of the reformer tubes in PERED direct-reduction plants.Steel industry catalystsDirect reduction of iron unitsRead more →
    ICD-130Domed High Active Reforming Catalyst (PERED)Active catalyst with domed pellets for the top layer of the reformer tubes in PERED direct-reduction plants.Steel industry catalystsDirect reduction of iron unitsRead more →
    ICD-200Semi-Active Reforming CatalystSemi-active catalyst for the middle layer of the reformer tubes in direct-reduction plants.Steel industry catalystsDirect reduction of iron unitsRead more →
    ICD-300Inert CatalystInert catalyst for the bottom layer of the reformer tubes in direct-reduction plants.Steel industry catalystsDirect reduction of iron unitsRead more →
    ICD-410Primary Steam Reforming CatalystSteam methane reforming catalyst for producing syngas and hydrogen in the petrochemical and oil industries.Petrochemical industry catalystsHydrogen unitsMethanol unitsAmmonia and urea unitsRead more →
    ICD-420Autothermal Reforming CatalystAutothermal methane reforming catalyst for syngas production.Petrochemical industry catalystsMethanol unitsRead more →
    ICD-430Secondary Steam Reforming CatalystSecondary reformer catalyst for ammonia plants; with steam and process air it completes the reforming of the remaining methane and brings the nitrogen needed for ammonia synthesis into the syngas.Petrochemical industry catalystsAmmonia and urea unitsRead more →
    ICD-510Hydro-Desulfurization Catalyst (HDC)Hydrodesulfurization catalyst; converts organic sulfur in the feed to H₂S for the zinc-oxide bed.Petrochemical industry catalystsHydrogen unitsMethanol unitsAmmonia and urea unitsRead more →
    ICD-520Pre-Reforming CatalystPre-reforming catalyst; converts the heavier hydrocarbons of the feed before the main reformer.Petrochemical industry catalystsMethanol unitsRead more →
    ICD-530High Temperature Shift Catalyst (HTSC)High-temperature shift catalyst; converts most of the carbon monoxide in syngas with steam into hydrogen.Petrochemical industry catalystsHydrogen unitsAmmonia and urea unitsRead more →
    ICD-540Low Temperature Shift Catalyst (LTSC)Low-temperature shift catalyst; converts the carbon monoxide left after high-temperature shift.Petrochemical industry catalystsHydrogen unitsAmmonia and urea unitsRead more →
    ICD-550Methanation CatalystMethanation catalyst; converts the remaining carbon oxides into methane.Petrochemical industry catalystsHydrogen unitsAmmonia and urea unitsRead more →
    ICD-610Low Vanadium Pentoxide Catalyst (Star)Vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, low-vanadium grade, Star shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-611Low Vanadium Pentoxide Catalyst (Ring)Vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, low-vanadium grade, Ring shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-612Low Vanadium Pentoxide Catalyst (Quattro)Vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, low-vanadium grade, Quattro shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-620Cesium-Promoted Vanadium Pentoxide Catalyst (Star)Cesium-promoted vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, with a low ignition temperature, Star shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-621Cesium-Promoted Vanadium Pentoxide Catalyst (Ring)Cesium-promoted vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, with a low ignition temperature, Ring shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-622Cesium-Promoted Vanadium Pentoxide Catalyst (Quattro)Cesium-promoted vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, with a low ignition temperature, Quattro shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-630Dust-Resistant Sulfuric Acid CatalystDust-resistant sulfuric acid catalyst for the top layer of the converter's first bed, where dust from the feed gas settles.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-640High Vanadium Pentoxide Catalyst (Star)Vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, high-vanadium grade, Star shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-641High Vanadium Pentoxide Catalyst (Ring)Vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, high-vanadium grade, Ring shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-642High Vanadium Pentoxide Catalyst (Quattro)Vanadium catalyst for oxidising SO₂ to SO₃ in sulfuric acid plants, high-vanadium grade, Quattro shape.Chemical industry catalystsSulfuric acid production unitsRead more →
    ICD-710Sulfur AdsorbentZinc-oxide adsorbent that removes sulfur from the feed gas of direct-reduction plants, ahead of the reformer.Steel industry catalystsDirect reduction of iron unitsRead more →
    ICD-720Sulfur AdsorbentZinc-oxide adsorbent for removing sulfur from gas feeds in oil, gas and petrochemical units.Petrochemical industry catalystsHydrogen unitsMethanol unitsAmmonia and urea unitsRead more →
    ICD-730Sulfur AdsorbentZinc-oxide adsorbent that removes sulfur from the feed gas of direct-reduction plants, ahead of the reformer.Steel industry catalystsDirect reduction of iron unitsRead more →
    Talk to our engineers about the right catalyst for your unit.