Site map+98 21 2201 8011Contact us
Steel industry catalysts

ICD-710 Sulfur Adsorbent

Zinc-oxide adsorbent that removes sulfur from the feed gas of direct-reduction plants, ahead of the reformer.

Sulfur Adsorbent

Where it is used

The process steps where this product is used are highlighted.

Direct reduction of iron units

In the reformer of a direct-reduction plant, natural gas and recycled top gas from the furnace are turned into reducing gas, which reduces iron ore pellets to sponge iron.

  1. FeedNatural gas and recycled top gas from the reduction furnace
  2. Feed gas desulfurizationThe zinc-oxide (ZnO) adsorbent takes up the sulfur compounds in the feed gas before it enters the reformer, so that the reformer catalyst is not poisoned.
  3. ReformerThe reformer tubes are filled from bottom to top with layers of inert, semi-active and active catalyst; ICD-120 and ICD-130 are for PERED plants.
  4. OutputReducing gas (hydrogen and carbon monoxide) for the reduction furnace
The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

Specifications

ShapeExtrudate
ColourWhite to cream
Height or length9–15 mm
Bulk density1.1–1.3 kg/L
Specific surface area (BET)30–40 m²/g
Pore volume0.22 ± 0.04 cm³/g
ZnO88–92 wt%
CoOTrace wt%
NiOTrace wt%
MoO₃Trace wt%
Operating temperature360–400 °C
Sulfur pick-up capacity30 wt% S
Space velocity2000 1/h
StorageKeep dry

These values are awaiting final approval by the technical department; ask us for the official data sheet.

The technical and safety data sheets of this product are sent on request. Request the technical or safety data sheet

Talk to our engineers about the right catalyst for your unit.