Steel industry catalysts
ICD-120 High Active Reforming Catalyst (PERED)
Active catalyst for the top layer of the reformer tubes in PERED direct-reduction plants.

Where it is used
The process steps where this product is used are highlighted.
Direct reduction of iron units
In the reformer of a direct-reduction plant, natural gas and recycled top gas from the furnace are turned into reducing gas, which reduces iron ore pellets to sponge iron.
- FeedNatural gas and recycled top gas from the reduction furnace
- Feed gas desulfurizationThe zinc-oxide (ZnO) adsorbent takes up the sulfur compounds in the feed gas before it enters the reformer, so that the reformer catalyst is not poisoned.
- ReformerThe reformer tubes are filled from bottom to top with layers of inert, semi-active and active catalyst; ICD-120 and ICD-130 are for PERED plants.
- OutputReducing gas (hydrogen and carbon monoxide) for the reduction furnace
Specifications
| Shape | Gear-shaped | |
| Colour | Light to dark grey | |
| Outer diameter | 31–35 mm | |
| Height or length | 17–19 mm | |
| Hole diameter | 7–8 mm | |
| Number of holes | 10 | |
| Bulk density | 0.9–1.1 kg/L | |
| Radial crush strength | > 120 N/pellet | |
| Specific surface area (BET) | > 2.5 m²/g | |
| Pore volume | 0.1–0.25 cm³/g | |
| NiO | 8.7–10.5 wt% | |
| Al₂O₃ | Balance wt% | |
| Na₂O + K₂O | < 1.7 wt% | |
| Storage | Keep dry | |
| Typical service life | 5 years |
These values are awaiting final approval by the technical department; ask us for the official data sheet.
Documents
All documents →- ICD-C-01ICD product catalogue (Persian edition)Catalogue · PDF · 6.9 MB
The technical and safety data sheets of this product are sent on request. Request the technical or safety data sheet