Site map+98 21 2201 8011Contact us
Industries

Steel industry

Catalysts for MIDREX, HYL and PERED direct-reduction plants, from feed-gas desulfurization to the reformer tubes.

What the catalyst does in direct reduction

In direct-reduction iron plants, natural gas and the gas returned from the shaft furnace are converted in the reformer into reducing gas, a mixture of hydrogen and carbon monoxide, which turns iron ore into sponge iron in the furnace. The catalyst in the reformer tubes sets the quality of the reducing gas. Upstream of the reformer, a zinc oxide adsorbent removes the sulfur from the gas so that the reformer catalyst is not poisoned.

Our catalysts for these plants

Reformer tubes are filled with several catalyst layers, highly active, semi-active and inert, each in its own part of the tube. Iranian Catalyst Development makes all of these layers, including the catalysts for PERED plants, as well as the zinc oxide adsorbents for desulfurization. The place of each product is shown on the unit map further down this page.

The company's first shipment of direct-reduction catalyst went to Golgohar Iron and Steel Development Company in 2021. By 2022 its catalysts had been loaded four times in direct-reduction plants, among them the Kowsar megamodule and megamodule A of Hormozgan Steel.

The catalyst in your plant today

If you use an imported catalyst or one from another maker, send us its details and we will propose the Iranian-made equivalent with a technical comparison.

Product equivalents

Unit map

Direct reduction of iron units

In the reformer of a direct-reduction plant, natural gas and recycled top gas from the furnace are turned into reducing gas, which reduces iron ore pellets to sponge iron.

  1. FeedNatural gas and recycled top gas from the reduction furnace
  2. Feed gas desulfurizationThe zinc-oxide (ZnO) adsorbent takes up the sulfur compounds in the feed gas before it enters the reformer, so that the reformer catalyst is not poisoned.
  3. ReformerThe reformer tubes are filled from bottom to top with layers of inert, semi-active and active catalyst; ICD-120 and ICD-130 are for PERED plants.
  4. OutputReducing gas (hydrogen and carbon monoxide) for the reduction furnace
The order of steps and the catalyst positions are a draft awaiting approval by the technical department.Industry page →

Products for this industry

ICD-100High Active Reforming CatalystActive catalyst for the top layer of the reformer tubes in direct-reduction plants.
ICD-110Domed High Active Reforming CatalystActive catalyst with domed pellets for the top layer of the reformer tubes in direct-reduction plants.
ICD-120High Active Reforming Catalyst (PERED)Active catalyst for the top layer of the reformer tubes in PERED direct-reduction plants.
ICD-130Domed High Active Reforming Catalyst (PERED)Active catalyst with domed pellets for the top layer of the reformer tubes in PERED direct-reduction plants.
ICD-200Semi-Active Reforming CatalystSemi-active catalyst for the middle layer of the reformer tubes in direct-reduction plants.
ICD-300Inert CatalystInert catalyst for the bottom layer of the reformer tubes in direct-reduction plants.
ICD-710Sulfur AdsorbentZinc-oxide adsorbent that removes sulfur from the feed gas of direct-reduction plants, ahead of the reformer.
ICD-730Sulfur AdsorbentZinc-oxide adsorbent that removes sulfur from the feed gas of direct-reduction plants, ahead of the reformer.
Talk to our engineers about the right catalyst for your unit.