Petrochemical industry catalysts
ICD-510 Hydro-Desulfurization Catalyst (HDC)
Hydrodesulfurization catalyst; converts organic sulfur in the feed to H₂S for the zinc-oxide bed.
Where it is used
The process steps where this product is used are highlighted.
Hydrogen units
The hydrogen unit makes, from natural gas or naphtha and steam, the hydrogen that the refinery's treating and hydrocracking units need.
- FeedNatural gas or naphtha, and steam
- Feed hydrogenationConverts organic sulfur compounds to H₂S.
- DesulfurizationZinc oxide absorbs the H₂S.
- Steam reforming
- High-temperature shift
- Low-temperature shift
- MethanationIn units that convert the remaining carbon monoxide to methane instead of PSA purification.
- OutputHydrogen for treating and hydrocracking units
Methanol units
Natural gas becomes syngas in the reformers, and syngas becomes methanol in the synthesis reactor.
- FeedNatural gas and steam
- Feed hydrogenation
- Desulfurization
- Pre-reforming
- Steam reforming
- Autothermal reformingIn combined or autothermal reforming schemes.
- Methanol synthesis
- OutputMethanol
Ammonia and urea units
Natural gas, steam and air become ammonia syngas (hydrogen and nitrogen); ammonia is the feed of the urea plant.
- FeedNatural gas, steam and air
- Feed hydrogenation
- Desulfurization
- Primary reforming
- Secondary reformingWith process air added, the reforming of the remaining methane with steam is completed and the nitrogen needed for ammonia enters the gas.
- High-temperature shift
- Low-temperature shift
- MethanationRemoves the remaining carbon oxides before ammonia synthesis.
- OutputAmmonia syngas for the synthesis reactor
Specifications
| Shape | Extrudate | |
| Colour | Violet blue |
These values are awaiting final approval by the technical department; ask us for the official data sheet.
Documents
All documents →- ICD-C-01ICD product catalogue (Persian edition)Catalogue · PDF · 6.9 MB
The technical and safety data sheets of this product are sent on request. Request the technical or safety data sheet